제품소개
IPR 5000은 2 ohms에서 채널당 2,525W를 자랑합니다. 2채널의 독립적인 Linkwitz-Riley 크로스오버, 경량 알루미늄 샤시 안에 보관되는 가변 속도 팬, DDT 스피커 보호 및 혁신적인 새로운 IPR 클래스 D topology 적용하였습니다.
Specifications
- Rated Power (2 x 2 ohms) : 2,525 watts per channel @ 1 kHz 1% T.H.D. both channels driven
- Rated Power (2 x 4 ohms) : 1,510 watts per channel @ 1 kHz at <0.1% T.H.D. both channels driven
- Rated Power (2 x 8 ohms) : 890 watts per channel @ 1 kHz at <0.1% T.H.D. both channels driven
- Rated Power (1 x 2 ohms) : 2,900 watts @ 1 kHz at <0.1% T.H.D
- Rated Power (1 x 4 ohms) : 1,780 watts @ 1 kHz at <0.1% T.H.D
- Rated Power (1 x 8 ohms) : 975 watts @ 1 kHz at <0.1% T.H.D
- Minimum Load Impedance : 2 ohms
- Maximum RMS Voltage Swing : 105 volts
- Frequency Response : 20 Hz - 60 kHz; -0.4 dB, -3.0 dB at 1 watt
- T.H.D. (2 x 2 ohms) : <0.2% @ 2,000 watts per channel from 20 Hz to 4 kHz,
decreasing to 1,450 watts at 20 kHz.
- T.H.D. (2 x 4 ohms) : <0.1% @ 1,400 watts per channel from 20 Hz to 20 kHz
- T.H.D. (2 x 8 ohms) : <0.1% @ 860 watts per channel from 20 Hz to 20 kHz
- Input CMRR : > - 75 dB @ 1 kHz
- Voltage Gain : x 40 (+37dB)
- Crossover : 100 Hz switchable 2nd order High pass and 3rd order Low Pass per channel
- Crosstalk : > -70 dB @ 1 kHz at 100 watts power @ 4 ohms
- Hum and Noise : > -106 dB, 'A' weighted referenced to rated power @ 4 ohms
- Slew Rate : > 12V/μs
- Damping Factor (8 ohms) : > 210:1 @ 20 Hz : 1 kHz at 8 ohms
- Phase Response : +5 to -85 degrees from 20Hz to 20kHz
- Input Sensitivity : 1.95 volts +/- 3% for 1 kHz 4 ohm rated power,
1.8 volts +/- 3% for 1 kHz 2 ohm rated power
- Input Impedance : 20k ohms, balanced and 10k ohms unbalanced
- Current Draw @ 1/8 in watts : 850 @ 2 ohms, 525 @ 4 ohms, 340 @ 8 ohms
- Current Draw @ 1/3 in watts : 2,080 @ 2 ohms, 1,200 @ 4 ohms, 700 @ 8 ohms
- Current Draw @ 1/8 in VA : 1,380 @ 2 ohms, 900 @ 4 ohms, 655 @ 8 ohms
- Current Draw @ 1/3 in VA : 3,000 @ 2 ohms, 1,860 @ 4 ohms, 1,210 @ 8 ohms
- Current Draw @ idle : 90 watts, 195VA
- Cooling : 3 temperature dependent variable speed fans
- Controls : 2 front panel attenuators, crossover select switch for H.P.F, Normal and L.P.F
- Indicator LEDs : 2 DDT (clip limiting), 2 Signal presence, 2 Active status, 2 Temp and 2 DC protect
- Protection : Thermal, DC, subsonic, incorrect loads, under and over voltage
- Connectors : Inputs: Dual Combination 1/4” XLR, Outputs: Dual 1/4” signal patch, Dual 4-pin twist-lock connectors
- Construction : 0.062” thick aluminum
- Warranty : 5 years
- Dimensions(W x H x D) : 431.8 mm x 88.9 mm x 266.7 mm behind front panel + 0.6” for handle
- Weight : 5.5 kg(Net), 6.6 kg(Gross)